Philips EverFlo Q Service And Technical Reference Manual page 76

7. Using side cutters, cut the cable tie securing the inlet boot bellows to the inlet tube assembly. Discard
the cut cable tie.
8. Discard the used inlet tube assembly
Inlet Tube Installation
1. Assemble the new inlet tube assembly by sliding the silicone tube over the tee and elbow connections.
Ensure the center-to-center distance from elbow to tee is approximately 4.75 inches.
Page 76
4.75 in.
LO TM
E F S & T
VER ERVICE
I
ECHNICAL NFORMATION
1039055, VER. 06