Deleting Or Changing The Password - LG E-NOTE H1000B User Manual

Deleting or Changing the Password

You can do this only if you already know the password.
1. When changing the password
2. When deleting the password
Main Advanced
Phoenix SecureCore(tm) Setup Utility
Main Advanced
Supervisor Password Is:
Supervisor Password Is:
Set Supervisor Password
Set Supervisor Password
User Password Is:
User Password Is:
Set User Password
Set User Password
Password on boot:
Password on boot:
F1 Help Select Item
ESC Exit Select Menu
F1 Help Select Item
ESC Exit Select Menu
26
Phoenix SecureCore(tm) Setup Utility
Security Boot
Security Boot Exit
Clear
Item Specific Help
Clear
[ Enter ]
[ Enter ]
Supervisor Password
Clear
Clear
controls access to the
[Enter]
[Enter] setup utility.
[Disabled]
[Disabled]
-/+ Change Values F9 Setup Defaults
Enter Select Sub-Menu F10 Save and Exit
-/+ Change Values
Enter Select
1. Activate the system setup window, enter
the existing password, and press the
[Enter] key.
2. Change the password in the same way
as setting the password.
1. Activate the system setup window, enter
the previously set password, and press
the [Enter] key.
Exit
2. In the system setup window, use the ar-
row keys to move to the Security section.
Item Specific Help
3. In the window shown on the left, use
Supervisor Password
the arrow keys to select [Set Supervisor
controls access to the
Password] and press the [Enter] key.
setup utility.
4. When the message shown on the left
appears, enter the current password in
Enter Current Password.
F9 Setup Defaults
Sub-Menu F10 Save and Exit
5. Press the [Enter] key for Enter New
Password and Confi rm New Password.
6. When the message shown on the left
appears, select [Continue] and press the
[Enter] key.
7. Press the [F10] key to save the changes.
8. When the message shown on the left ap-
pears, select [Yes] and press the [Enter]
key. Then, the product restarts.