Important Safety Information - Toshiba TR1X426110 Owner's Manual

Important Safety Information

2
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation, maintenance, and
operation. Failure to comply will create a risk of personal injury, property damage and/or void the warranty
on the equipment.

The equipment should be installed or serviced by trained service personnel in accordance with the
applicable requirements of the National Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code
and the applicable sections of ANSI C2, the National Electrical Safety Code.

At least two people are required to unpack and move the rack.

The enclosure should be stored in an indoor controlled environment. It should be stored away from
direct sunlight, moisture, dust, extreme temperatures, flammable liquid, and conductive contaminants.

Do not step or place any object on top of the enclosure.

The enclosures are not stackable. Do not attempt to stack the enclosures.

The equipment is easily tipped. Use extreme caution when unpacking or moving.

Ensure that the floor / wall structure is able to withstand the weight of the enclosure while fully loaded.

Always ensure adequate amount of personnel are present when loading, unloading or moving the
enclosure to reduce risk of personal injury or product damage.

Place heavier equipment towards the bottom of the enclosure to avoid unstable conditions.

Evenly distribute all mounted loads and equipment to ensure stability within the enclosure system.

The casters on the enclosure are not designed to provide long-term support. Use the leveling feet to
provide long-term support.

Do not push the enclosure from the side panels to move it. Pushing from the side panels will cause a
tipping hazard.

Ensure the enclosure is fully mounted and secure before installing equipment.

Leave sufficient space at the front and rear of the enclosure for proper ventilation. Do not block, cover
or insert objects into the external ventilation openings of the enclosure.

Do not re-ship the enclosure with additional equipment installed using the standard pallet and
packaging that came with the enclosure.

Save all packaging for later use. Repackaging and shipping the enclosure without original packaging
may cause damages that will void warranty.

Ensure the enclosure is installed on a flat, level surface for proper operation.
Toshiba Rack Enclosure Installation Manual – 99881-000
WARNING
2