Siemens Sitrans LR400 Instruction Manual page 51

4.2.5.8.1 Tank Design (F = Vertical Cylinder)
Value
Enter the external form of your vessel. You can choose from:
• Linear (any form with vertical walls and a flat floor)
• Vertical cylinder (vertically standing cylindrical form with curved covers)
• Horizontal cylinder (horizontal cylindrical form with curved caps)
• Sphere
4.2.5.8.2 Bottom Design (F = Dished end)
Value
Enter the form of the two vessel cover caps. You can choose from:
• Dished (according to DIN 28011)
• Basket (according to DIN 28013)
• Bullet (hemispherical shaped floor)
4.2.5.8.3 Tank volume (F = 20 m
Value
4.2.5.8.4 Tank height (F = 20 m)
Value
4.2.6 Mass Parameters (for qualified personnel only)
Mass parameters 4.2.6. 1 to 4.2.6.9 are for Factory Authorized Personnel only.
4.2.6.1 Mass URV (for qualified personnel only)
4.2.6.2 Mass LRV (for qualified personnel only)
4.2.6.3 Mass Damping (for qualified personnel only)
4.2.6.4 MinLim Mass (for qualified personnel only)
4.2.6.5 MaxLim Mass (for qualified personnel only)
4.2.6.6 HYST Mass (for qualified personnel only)
7ML19985FH06 SITRANS LR400 (7ML5421) – INSTRUCTION MANUAL
Linear
Vertical cylinder
Horizontal cylinder
Sphere
Dished end
Basket end
Bullet bottom
numerical value
numerical value
3
)
Page 47