Step 4 - Make Direct Wire Electrical Connection - Haier HCC2220BEB Installation Instructions Manual

6. Insert the long clamping screw (provided) into the outermost hole of the
clamping bracket. Repeat for the other side of the cooktop.
a
b
c
d
Glass Cooktop
A
Countertop
B
Clamping Screw
C
Cooktop Base
D
7. Using a screwdriver, tighten the clamping screws against the countertop. Do
not overtighten the screws.
STEP 4 - MAKE DIRECT WIRE ELECTRICAL
CONNECTION
To properly install your cooktop, complete electrical connections according to local
codes and ordinances.
Disconnect power before servicing.
Use 8 gauge copper wire.
Electrically ground cooktop.
Failure to do so can result in death, fire or electrical shock.
Be sure your appliance is properly installed and grounded by a qualified
technician. Ask your dealer to recommend a qualified technician or an authorized
repair service.
This appliance is manufactured with a green GROUND wire connected to the
cooktop chassis. After making sure that the power has been turned off, connect the
flexible conduit from the cooktop to the junction box using a UL listed conduit
connector.
e
E
F
WARNING
Electrical Shock Hazard
8
f
Clamping Bracket Attachment
Screw
Clamping Bracket (extends from
the cooktop base to underneath
the countertop)