Design and specifications are subject to change without prior notice. For the power supply, refer to the label attached to the product. Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center ...
Page 2
TX-T2791H TX-T2793H TX-T3091WH TX-T3092WH TX-T3093WH COLOR TELEVISION Owner’s Instructions Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. ▪ Model _______________ ▪ Serial No. _______________...
Aim the remote control towards this spot on the TV. 7 POWER Press to turn the TV on and off. Owner’s Instructions/ Safety Guide Manual TX-T2791H/ TX-T3091WH TX-T3092WH buttons as you TX-T2793H/TX-T3093WH ➢ The product color and shape may vary depending on the model.
➢ The product color and shape may vary depending on the model. 8 HDMI/DVI IN (TX-T2791H/TX-T3091WH) HDMI1/DVI IN (TX-T2793H/TX-T3092WH/TX-T3093WH) - Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs.
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box. ➢...
Connecting VHF and UHF Antennas Antennas with 300 Ω Flat Twin Leads If you are using an air antenna(such as a roof antenna or “rabbit ears”) that has 300 Ω twin flat leads, follow the directions below. Place the wires from the twin leads under the screws on a 300-75 Ω adapter(not supplied). Use a screwdriver to tighten the screws.
Also, you can connect to AV IN 2 on the side panel of TV. S-Video Connection Your Samsung TV can be connected to the S-Video jack of a VCR. (This connection delivers a better picture when compared to the regular video connection above.) ➢...
Connecting a DVD Player/Set-Top Box The rear panel jacks on your TV make it easy to connect a DVD player/Set-Top Box. ➢ Each DVD Player/Set-Top Box has a different back panel configuration. When connecting a DVD Player/Set-Top Box, match the color of the connection terminal to the cable. Connect Component Cables between the COMPONENT IN 1 [Y, P ] or COMPONENT IN 2 [Y, P...
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. ➢ Each Digital Audio System has a different back panel configuration. Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jack on the TV and the Digital Audio Input jack on the Digital Audio System.
Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: Press the POWER button on the remote control. The message Menu language, Shop Mode, Channels and Time will be set is displayed. Press the ENTER button, then the message Select the language of the OSD. is displayed. Press the ENTER button to enter the language.
Setting the Clock Automatically Press the ENTER button. Press the ▲ or ▼ button to select On or Off, then the ENTER button. The message Select the time zone where you are located. is displayed. 10 Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER button.
Press the SOURCE button on the remote control to view an external signal source. ➢ HDMI will appear in the Source list for models TX-T2791H and TX-T3091WH. HDMI1/HDMI2 will appear in the Source list for models TX-T2793H, TX-T3092WH, and TX-T3093WH.
Changing the Screen Size You can select the picture size which best corresponds to your viewing requirements. Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Size, then press the ENTER button. Press the ▲...
Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the “automatic” settings.) Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Press the ▲...
Choosing a Multi-Channel Sound (MTS) Track - Analog Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Press the ▲ or ▼ button to select Multi-Track Options. Press the ENTER button to select Multi-Track Sound.
Setting Your Favorite Channels You can set channels you watch frequently as favorites. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Press the ▲...
Labeling Channels - Analog Channels can be labeled so that their call letters appear whenever the channel is selected. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲...
Setting the Time Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Setting the Clock Manually Press the MENU button to display the menu. Press the ▲...
Setting the Sleep Timer The Sleep Timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲...
Page 21
At this point, one of the TV-Ratings is selected. Press the ENTER button. Depending on your existing setup, the “ selected. (Blank = Unblocked, = Blocked) While “ To select a different TV-Rating, press the ▲ or ▼ button and then repeat the process. ...
How to Set up Restrictions Using the ‘Canadian French’ (for canada models) 14 Press the ▲ or ▼ button to select Canadian French, then press the ENTER button. 15 Press the ▲ or ▼ button to select an appropriate restriction. Press the ENTER button to activate the restriction selected.
Viewing Closed Captions(On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Caption, then press the ENTER button. Press the ENTER button to select Caption.
Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.
The default setting of the function help is On. Upgrading the Software Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on the back of your TV.
Satellite STB HDD COMBO Standard Identifying Problems If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Poor picture quality.
Page 29
This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@samsung.com. GPL software: Linux Kernel, Busybox, Binutils...
Page 30
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
Page 31
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
Page 32
GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
Page 33
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License;...
Page 34
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6.
Page 35
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.