Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Note This stand is not for the Floor Standing Type. Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above.
Page 3
Unpacking Manuals Quick Setup Guide MagicInfo Software CD, MagicInfo Manual CD (Applicable to the EXn model only) Cables Power Cord Others Remote Control (BP59-00138A) LCD Display Warranty Card (Not available in all loca- tions) D-Sub Cable Batteries (AAA X 2) HOLDER-WIRE 2EA (Not available in all loca- tions)
Page 4
Sold separately LAN Cable RGB to Component Cable RGB to AV Cable Your LCD Display Front SOURCE button Switches from PC mode to Video mode. Selects the input source that an external device is connected to. [PC] → [AV] → [Component] → [HDMI] → [MagicInfo] Note For an EX model, •...
Page 5
(Power) button Use this button for turning the LCD Display on and off. Brightness Sensor Automatically detects the surrounding brightness. Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods.
Switches the LCD Display On/Off. The power cord plugs into the LCD Display and the wall outlet. Note Applicable to the EXn model only. Resets MagicInfo. Keyboard / Mouse, Mass Storage Device Compatible. Connects to a LAN cable to allow Internet or network access in MagicInfo mode.
Page 7
HDMI IN • Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable. • Up to HDMI 1.0 can be supported. DVI OUT(LOOPOUT) • Connect a monitor to another monitor through a DVI, DVI to HDMI cable.
AUDIO IN Connect the [AUDIO IN] port on the monitor to the audio output port on the PC or on the external device using an audio cable. AUDIO OUT Connect a headphone or an External speak- Note The [AUDIO OUT] port is only supported for 460EX(n) and 550EX(n) models.
Page 9
Note See Connecting Cables for further information regarding cable connections. Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequen- POWER 3.
Page 10
4. DEL / GUIDE but- 5. + VOL - SOURCE D.MENU 8. TOOLS 9. Up-Down Left-Right but- tons INFO 11. COLOR BUTTONS TTX/MIX 13. MTS/DUAL The "-" button is used to select Digital channels. Electronic Program Guide (EPG) display. - This function does not work for this LCD Display. Adjusts the audio volume.
Page 11
ENTER/PRE-CH MUTE CH/P 17. TV 18. MENU RETURN EXIT 21. MagicInfo - This function does not work for this LCD Display. This button is used to return to the immediately previous channel. - This function does not work for this LCD Display. Pauses (mutes) the audio output temporarily.
Connections Connecting a Computer There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [RGB / COMPONENT / AV IN] port on the back of your LCD Display and the 15 pin D-sub Port on the computer.
Note • Turn on both your computer and the LCD Display. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Note • AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display.
Connecting an External Monitor Connect between the [DVI OUT(LOOPOUT)] port on the LCD Display and the input port on another monitor using a DVI cable. Connect between the [AUDIO OUT] port on the LCD Display and the audio input port on another monitor using a stereo cable.
Connect a set of audio cables between the [AUDIO IN] on the LCD Display and the AUDIO OUT jacks on the DVD player. Note • Select AV for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control.
Connecting Using a DVI to HDMI Cable Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of the LCD Display using a DVI to HDMI cable. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the [AUDIO IN] terminal of the LCD Display.
Connect a set of audio cables between the [AUDIO IN] on the LCD Display and the AUDIO OUT jacks on the DVD player. Note • Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control.
Connecting to an Audio System Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and [AUDIO OUT] on LCD Display. Connecting a LAN Cable Connect the LAN cable. Note Applicable to the EXn model only.
Connecting a USB devices You can connect USB devices such as a mouse or keyboard. Note Applicable to the EXn model only. Assembling the Cables Note Do not pull the cables too hard when arranging them. This may cause damage to the product’s connection terminals.
Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check Turn off both your computer and the LCD Display. Unplug the video cable from the back of the computer. Turn on the LCD Display.
2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). Symptoms and Recommended Actions Note A LCD Display recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the LCD Display to become blank, have poor coloring, become noisy, etc.
Check if the signal cable between the computer and the LCD Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. The screen is blank and the power indicator is off. Ensure that the power cord is firmly connected and the LCD Display is on.
The screen color is inconsistent. Adjust color using Custom under OSD Color Adjustment menu. The color image is distorted by dark shadows. Adjust color using Custom under OSD Color Adjustment menu. The color white is poor. Adjust color using Custom under OSD Color Adjustment menu. The Power Indicator blinks.
Page 24
Check if the batteries are empty. Check if the power is on. Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity. Q & A How can I change the frequency? The frequency can be changed by reconfiguring the video card.
Page 25
Troubleshooting Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the In- formation section or contact your dealer.