Download Print this page
Epson Expression Photo XP-960 Start Here
Epson Expression Photo XP-960 Start Here

Epson Expression Photo XP-960 Start Here

Small-in-one printer
Hide thumbs Also See for Expression Photo XP-960:

Advertisement

XP-960 Small-in-One
Start Here
Read these instructions before using your product.
1
Unpack
Note:
• Do not open ink cartridge packages until you are ready to install the
ink. Cartridges are vacuum packed to maintain reliability.
• The CD/DVD tray is taped to the bottom of cassette 2.
1
Remove all protective materials from the product.
2
Lift up the scanner unit and remove all protective
materials.
Printer
®
3
Lower the scanner unit.
2
Turn on and configure
1
Connect the power cord to the back of the printer and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Turn on the product, then adjust the control panel.
3
Select your language.
Note:
• You can change the language later using the product's control
panel. For more information, see the online User's Guide.
• If an error message appears, turn off the product and check
that no protective material has been left inside the product.
3

Install ink cartridges

1
Lift up the scanner unit.
Caution:
Do not touch the flat, white cable.

Advertisement

loading

Summary of Contents for Epson Expression Photo XP-960

  • Page 1: Install Ink Cartridges

    XP-960 Small-in-One Printer Lower the scanner unit. ® Start Here Read these instructions before using your product. Turn on and configure Unpack Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. Turn on the product, then adjust the control panel.
  • Page 2: Load Paper

    Unpack the ink cartridges. You can load the following paper sizes: • Cassette 1: 3.5 × 5-, 4 × 6-, or 5 × 7-inch photo paper • Cassette 2: Letter-size, A4-, legal-size, or 8 × 10-inch paper See the instructions below for loading paper. •...
  • Page 3: Install Software

    Any problems? Install software Network setup was unsuccessful. Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to obtain the product software. • Make sure you select the right network name (SSID). The product can only connect to a network that supports 2.4 Make sure the product is NOT CONNECTED to your GHz.