Download Print this page

Sony Cyber-shot DSC-P7 Operating Instructions Manual page 3

Hide thumbs Also See for Cyber-shot DSC-P7:

Advertisement

'Ibis equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
T&se limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communicalions. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to mdio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
--Reorient or relocate the receiving antenna.
-Increase the separation between the
equipment and receiver.
--Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced
radio/TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital
device
pursuant to
Subpart I3 of Part 15 of FCC Rules.
Lithium-Ion batteries are
recvclable.
Uoi can help preserve our
enviromnent by returning your
used rechargeable batteries to the
collection and recycling location nearest you.
For more information regarding recycling of
rech'argeable batteries, call toll free
I-800-822-8837,
or visit
http:fwww.rbrc.orgl
cm: Do not handle damaged or leaking
m-Ion batteries.
TO PREVENT ELECTRIC SHOCK, DO NOT
USE THlS POLARIZED AC PLlJG WITH AN
EXTENSION CORD. RECEPTACLE OR
OTHER OUTLET
UNLESS
THE BLADES
CAN BE FULLY INSERTED TO PREVENT
BLmE EXPOSURE.
A mot&led plug complying with RS 1363 is
fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be
replaced, a 5 AMP fuse approved by ASTA or
BSI to BS 1362, (i.e., marked
with @ or f$?
mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never
use the plug without the fuse cover. If you
should lose the fuse cover, please contact your
nearest Sony service station.
Directive:EMC Directive 89/336fEEC,
9213 LJEEC
This equipment complies with the ElK
regulations when used under the following
circumstances:
e Residential area
a Business district
*Light-industry district
(This equipment complies with the EMC
standard regulations EN55022 Class I%)

Advertisement

loading

This manual is also suitable for:

Cyber-shot dsc-p9