ABB devices Pos : 13 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/U mwel t (--> Fü r alle D okumente <--)/Hinweis e/Hi nweis - U mwelt - ABB El ektr ogeräte @ 19\mod_1323162745839_15.doc x @ 110867 @ @ 1 All packaging materials and devices from ABB bear the markings and test seals for proper disposal.
Page 4
ABB-Welcome ABB products meet the legal requirements, in particular the laws governing electronic and electrical devices and the REACH ordinance. (EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS) (EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006) — 4 —...
Page 6
1B In standby mode, pick up handset to enter the communication menu. 4.3" display 2A M22301-. , with B/W display. 2B M22302-. / M22303-., with color display. Unlock button 3A Open the door by pressing this button at any time.
Page 7
ABB-Welcome (default function). 6B In standby mode, long-press this button for 3 seconds to send SOS alarm to guard unit. If LED flashes slowly, SOS was successfully sent to guard unit. If LED flashes fast, SOS was not successful. 6C *Programmable for additional function, e.g. call guard unit, intercom , etc.
Page 9
ABB-Welcome Hold this button to enter the brightness setttings. The rest time of the conversation. Number of outdoor stations Pos : 29 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> F ü r all e D okumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1...
ABB-Welcome Pos : 33 /DinA4 - Anl eitungen Onli ne/Ueberschriften/3./Stumm s chalten @ 20\mod_1323263607142_15.doc x @ 111951 @ 3 @ 1 Pos : 66 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> F ü r all e D okumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1 4.2.3...
Page 12
ABB-Welcome 4.2.3.3 Call guard unit CALL GUARD UNIT Call Guard Unit Fig. 5: Call guard unit 4.2.3.4 Broadcast BROADCAST Long-pressing “√“ button to broadcast Fig. 6: Broadcast This funtion is available in M22302-. / M22303-., color video handset indoor station.
Page 13
ABB-Welcome 4.2.3.5 Switch actuator SWITCH ACTUATOR Actuator 1 (001) Fig. 7: Switch actuator First, set the actuator list in the “system settings-switch actuator” menu. After choosing a list, press button √ to enable the lock or light that is connected to the switch actuator.
ABB-Welcome Settings 4.3.1 Overview Press button to enter the system settings menu. The following functions are available: Functions Intercom settings -Set intercom lists among different apartments or within the same apartment Switch actuator -Set the actuator list in this menu...
ABB-Welcome 4.3.2 Intercom call settings Intercom 1 (001) Intercom 2 Add New Fig. 8: Intercom setting menu Functions Choose the previous selection or scroll up Choose the next selection or scroll down Confirm the selection or enter to edit it Return to the previous screen Add a new intercom list.
Page 16
ABB-Welcome Add a new list INTERCOM External Intercom Call Type Target Address Rename mike Save Cancel Fig. 9: Add new intercom Functions Enter to choose the call type: -an external intercom means a call from different apartments. -an internal intercom means a call from within the same apartment.
ABB-Welcome 4.3.4 Program button settings PROGRAM BUTTON Button 1 Release 2nd-Lock Button 2 None Fig. 11: Program button settings Functions Set functions for the program button, e.g. releasing second lock, calling guard unit, intercom call, enabling the switch actuator. *second lock means the lock is connected with an outdoor station. (NC-NO-...
ABB-Welcome 4.3.5 Call forward settings CALL FORWARD √ Call Forward Call Type Indoor Target Address Save Cancel Fig. 12: Call forward settings Functions Enable/disable the call forward function. Enter to choose a call type, including indoor or guard unit. Enter to change the target address if the call type is an indoor station.
ABB-Welcome 4.3.6 Auto unlock settings AUTO UNLOCK √ Auto Unlock √ Time 1 Time 2 : : : : Fig. 13: Auto unlock settings Functions Enable/disable the auto unlock function. Enable/disable the auto unlock during Time 1. Set starting time and ending time for Time 1 Enable/disable auto unlock during Time 2.
ABB-Welcome 4.3.7 Outdoor station password settings SET OS PASSWORD √ Enable Password 12345678 Enter Password (3-8 digits) Fig. 14: Outdoor station password settings Functions Enable/disable the password functions Enter a 3-8 digit password.. *Only available with the keypad. *This function only can be set in the master indoor station.
ABB-Welcome 4.3.8 Ringtone settings RING TONE Ring Tone 1 Default Outdoor Ring Tone 2 Other Outdoors Ring Tone 3 Doorbell Ring Tone 4 Others Fig. 15: Ringtone Functions Select the bell sound for the default outdoor station. Select the bell sound for other outdoor stations.
ABB-Welcome 4.3.9 Volume settings VOLUME Volume 3 Ringtone Volume √ Touchbutton Tone √ Repeated Tone Fig. 16: Volume settings Functions Set the volume of bell sound. Enable/disable the feedback tone that sounds when the touch button is pressed. The ringtone can be set as fixed or cycled.
ABB-Welcome 4.3.10 Date and time settings DATE AND TIME 2013 Date(YYYY-MM-DD) : Time Summer Time √ Fig. 17: Date and time settings Functions Set the date. Set the time. Enable/disable the summertime function. *This funtion is available in M22302-. / M22303-., color video handset indoor station.
ABB-Welcome 4.3.11 Other settings OTHER SETTINGS Auto Full Screen √ √ Door Status Check √ Auto-snapshots √ Missed Call Fig. 18: Other settings Functions Enable/disable the auto full screen function. Enable/disable the door status check function. (Only available if the sensor is installed with an outdoor station;...
ABB-Welcome 4.3.12 Blacklist settings BLACKLIST Blacklist 1 (001) Add New BLACKLIST Target Address Save Cancel Fig. 19: Blacklist settings Functions The existed blacklist. Press √ button to modify the setting. Add a new blacklist. A total of 32 blacklists can be added.
ABB-Welcome 4.3.13 History review HISTORY 1/63 2013-03-21 Outdoor - 1 ● 16:45 ● 2013-03-21 Outdoor - 1 16:45 ● 2013-03-21 Outdoor - 1 14:24 Outdoor -1 Fig. 20: History review Functions Up to 100 events can be recorded in the history menu.
Page 28
ABB-Welcome Press this button to view details of this event. Two photos are always made when a visitor rings the bell. Press this button to delete a recorded item *This funtion is available in M22302-. / M22303-., color video handset indoor station.
ABB-Welcome 4.3.14 Camera List CAMERA LIST The list is disabled Outdoor1-1 Outdoor 1-2 Camera1 CAMERA LIST- Camera 1 Enable √ Front door Rename √ Visible doorbell Save Cancel — 29 —...
Page 30
ABB-Welcome Functions Display the status of camera list. Only when the list is enable, user can make a surveilliance according to this camera list, and user can also modify this camera list. Display the cameras from camera interface. Press this button to enable or disable camera list.
ABB-Welcome 4.3.15 Language settings LANGUAGE English Franç aise Italiano Español Português Fig. 21: Language settings 4.3.16 Information INFORMATION Flash Version: V2.07_150629 MCU Version: V2.07_150703 M/S: Master Indoor St. Add.: Default Outdoor: Fig. 22: Information Information for outdoor station. (Scan QR code to get detailed instructions for the indoor station.)
ABB-Welcome 4.3.17 Reset factory default RESET FACTORY DEFAULT Are you sure to reset? Reset All Settings √ Clear All Data × Cancel Fig. 23: Reset factory default Functions Reset all settings: Reset the device and restore all default configurations. The operation does not delete the programmed data and history, such as intercom lists and switch actuator lists.
ABB-Welcome Pos : 79 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Übersc hriften (--> Fü r alle D okumente <--)/1. Ebene/M - O/Montage / Installation @ 18\mod_1302613966111_15.doc x @ 103373 @ 1 @ 1 Mounting/Installation Pos : 80 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Sic herheit (--> Fü r alle Dokumente <--)/Warnhinweis e/Sic herheit - Ni eders pannungs- und 230 V-Leitungen @ 18 \mod_1302617821491_15.doc x @ 103465 @ @ 1...
ABB-Welcome General installation instructions • Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station, system device). • Do not install the system controller directly next to the bell transformer and other power supplies (to avoid interference).
ABB-Welcome Pos : 84 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Übersc hriften (--> Fü r alle D okumente <--)/2. Ebene/M - O/Montage @ 18\mod_1302615960458_15.doc x @ 103424 @ 2 @ 1 Mounting Pos : 85.1 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/DoorEntr y/83220-AP- xxx/M ontag e - M odul e/Montage - Montagedose -- 83220-AP- xxx @ 19\mod_1323250406848_15.doc x @ 111098 @ @ 1 Recommended installation height 1.5 meters (4.9 feet)
Page 39
ABB-Welcome The bottom of the device has screw holes for fastening on the wall according to the illustrations above. In addition, the bottom of the device can be affixed to the existing flush-mounted box. The dimensions of the compatible flush-mounted box is shown in illustrations above.
Page 40
ABB-Welcome Mounted on the wall Affix the bottom of the device to the wall. Latch the upper part of the device onto its bottom part. Place the upper side of the device on the lock-in lugs and then press the bottom side onto the bottom part of the device until it is caught by the clamp.
Page 41
ABB-Welcome Mounted with desktop bracket Affix the bottom of the device to the desktop bracket. Latch the upper part of the device onto its bottom part. Place the upper side of the device on the lock-in lugs and then press the bottom side onto the bottom part of the device until it is caught by the clamp.
Page 42
We reserve the right to, at any time, make technical changes or changes in the content of this document without prior notice. The detailed specifications agreed to at the time of ordering appl ies to all orders. ABB accepts no responsibility for possible errors or omissions in this document.