Samsung 150S Owner's Manual page 16

SAMSUNG 190S
Introduction
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. Power on/off Switch
2. Power port
3. Multimedia Stand Power Port
4. Signal Port
Note: See Connecting Your Monitor
Connect the power cord for your monitor to the power port on
the back of the monitor.
Connect the power cord of the multimedia stand to the
multimedia stand power port on the back of the monitor
Connect the signal cable to the 15-pin, D-sub connector on
the back of your monitor.
for further information regarding cable connections.
User's Manual