Voicemail
Your Wireless Home Phone Base comes with standard wireless voicemail. Follow
the steps below to setup and use your voicemail.
Setup
Dial 1 on any home phone connected to the Wireless Home Phone Base and wait
four (4) seconds to connect to your AT&T wireless voicemail. Simply follow the voice
To enable remote voicemail retrieval and for added
prompts to complete setup.
security be sure to create a password during setup.
Message Waiting
There are two indicators for a new message waiting: 1) the voicemail icon; and 2) an
intermittent dial tone.
The voicemail icon on your Wireless Home Phone Base flashes when a voicemail
message is waiting. You will also hear an intermittent dial tone on any connected
phone handset before placing a call.
Retrieving Messages
To retrieve voice messages, dial 1 on any home phone connected to the Wireless
Home Phone Base and wait four (4) seconds to connect to your AT&T wireless
voicemail box. Simply follow the voice prompts to listen to and manage your
messages. (Alternately, you may dial your 10-digit home phone number to access
your voicemail box.)
Remote Retrieval
To retrieve voicemail messages from a phone not connected to the Wireless Home
Phone Base, dial the number associated with your Wireless Home Phone Base
service. When voicemail picks up, press *. You will then be prompted to enter your