Installation Tools - Samsung RFV01U-D2A Installation Manual

Installation Tools

The basic tools required for installation are listed in the following table. The
additional tools required for each site need to be identified and arranged during a
site survey before starting installation.
Table 2. Basic Installation Tools
No. Name
1 Torque Driver
2 Screw Driver Bit
3 Screw Driver
4 Torque Wrench
5 Torque Wrench Spanner Head
6 Spanner
7 Ratchet Wrench
8 Tape Measure
9 Power Extension Cable
RFV01U-D2A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Specification
Apply a torque range
: 2 to 10 lbf·in
Apply a torque range
: 20 to 90 lbf·in
'+', No. 2
'+', No. 3
'+', No. 2
'+', No. 3
Apply a torque range
: 10 to 50 lbf·in
Apply a torque range
: 100 to 400 lbf·in
Apply Hex. Bolt Head: 10 mm
(for 10 to 50 lbf·in)
Apply Hex. Bolt Head: 17 mm
(for 100 to 400 lbf·in)
Apply Hex. Bolt Head: 22 mm
(for 10 to 50 lbf·in)
Apply Hex. Bolt Head: 32 mm
(for 100 to 400 lbf·in)
10 mm
17mm
22 mm
32mm
10 × 13/17 × 19 (4 in 1)
16 ft./150 ft.
100 ft.
Confidential
Chapter 1 Before Installation
Purpose of use
For fastening finger guard (M3).
For fastening RRH ground pressure
terminal (M5 and M6).
For fastening finger guard (M3 and
M5).
For fastening RRH ground pressure
terminal (M6).
For loosening M3 and M5 screws.
For loosening M6 screws.
For tightening M6 Hex. Bolt and RF
connector of system (4.3-10 type).
For tightening M10 Hex. Bolt and RF
connector of antenna (DIN type).
For tightening M6 Hex. Bolt.
For tightening M10 Hex. Bolt.
For tightening RF connector of
system (4.3-10 type).
For tightening RF connector of
antenna (DIN type).
For loosening M6 Hex. Bolt.
For loosening M10 Hex. Bolt.
For loosening RF connector of
system (4.3-10 type).
For loosening RF connector of
antenna (DIN type).
For fastening Hex. Bolt.
Tape measure for length
measurement.
Basic tool.
8