Software Updating - Pioneer HTZ-BD52 Operating Instructions Manual

Software updating

The player's software can be updated using one
of the methods shown below.
Connecting to the Internet.
Using a disc.
Using a USB flash drive.
Product information on this player is provided
on the Pioneer website. Check the website
shown on page 10 for update and service
information on your Blu-ray disc player.
Caution
Do not unplug the power cord or remove the USB
flash drive/disc during software updating. Also,
do not press the reset button during updating.
Otherwise, the updating will be aborted and
malfunction may occur with the player.
There are two processes for software updating,
downloading and updating. Both processes may
take a certain period of time.
Other operations are defeated during software
updating. Furthermore, updating process cannot
be canceled.
Advanced settings
Updating connecting to the Internet
Note
Depending on the Internet connection
conditions, downloading may take a long time.
Steps 1 to 5 are the operations performed by
the user (they are intended to download the
software from the Internet).
Steps 6 to 8 are the operations performed
(automatically) by the player (they are intended
to update the software).
1. Connect to the Internet.
2. When playback is stopped, display the
Home Menu screen.
Press HOME MENU.
3. Select and set Initial Setup.
Use / to select, then press ENTER.
4. Select and set Options
Network Start.
Use / to select, then press ENTER.
5. Select and set Start.
Press ENTER.
6. Downloading of the software start.
The software download status is displayed
on the screen.
Depending on the Internet connection
conditions, software downloading may
take a certain period of time.
7. Updating starts.
Software updating may take a certain
period of time.
8. Updating completes.
This unit automatically restarts.
83
En
Update
8