Table of Contents
Advertisement
End-of-Call Options
After receiving a call from or making a call to a phone number that is not in your
Contacts, the phone number and duration of the call are displayed. Press the right
softkey
for Next and select Call Again to call the number again, or Send
Message to send a text or picture message directly to that number.
Tip: Press the left softkey
Note: The End-of-Call options are not displayed for calls identified as Unknown ID
or Restricted number.
Saving a Phone Number
Your phone can store up to 1000 phone numbers. Contacts entries can store up to
a total of five phone numbers, and each entry's name can contain up to 64
characters. (For more information, see "Adding a New Contact" on page 52.)
To save a number from standby mode:
1. Enter a phone number and press
2. Select New Entry. If your Contacts list is empty, skip this step and
proceed to step 3.
3. Select the number type (Mobile, Home, Work, Pager, Others) using the
navigation key and press
4. Enter the Name using the keypad.
5. Press the left softkey
After you have saved the number, the new Contacts entry is displayed.
To find a phone number:
1. Enter three to four digits of the last four digits of a phone number, press
the right softkey
matches is displayed.)
2. Use your navigation key to display the desired entry.
3. To dial the number, highlight it and press
for Call to call the number again.
.
.
for Done.
for Options, and select Find. (A list of possible
.
Phone Basics 15
Advertisement
Table of Contents
