Network Settings - Panasonic KX-HNH100 Operating Instructions Manual

Network settings

Before you begin
Confirm the following before you configure the
base unit to connect wirelessly to your home
network.
R Make sure your wireless router is turned on
and functioning.
R Make sure that you know your wireless
router's Wi-Fi settings, including its SSID
(wireless network name), security
password, etc. In some situations, you may
also need to know the IP-related settings
required in order for the base unit to
connect to your wireless router, including
your wireless router's IP address, subnet
mask, etc.
R Make sure you have the operating
instructions included with your wireless
router handy.
Typical configuration (DHCP)
1
MMENUN #523
2
MbN: "Wi-Fi setting" a MSELECTN
R The base unit searches for available
wireless networks and
"Searching..." is displayed.
R When searching is complete, a list of
available wireless networks is
displayed, including the SSID, security
setting, and signal strength.
R The base unit cannot find your wireless
router if the wireless router does not
broadcast its SSID. If there is a "stealth
mode" setting, turn it off; if there is a
"SSID broadcast" setting, turn it on.
Change the appropriate setting before
performing this procedure, and then
change it back when finished.
3
MbN: Select your wireless router's SSID.
a MSELECTN
4
Confirm the SSID and then press MOKN.
5
Enter the password required to access
the wireless network. a MOKN
R After the base unit connects to the
wireless router, "Connected to" and
For assistance, please visit http://www.panasonic.com/help
Getting Started
your wireless router's SSID is
displayed.
6
MOFFN
11