C80 Series Maintenance Manual
4 Failure Diagnosis
4.10 Servo Diagnosis Screen
Mainte
Mainte
You can confirm the following information on the servo diagnosis screen by pressing [Mainte] -> [Servo diagn] on the diag-
nosis (Diagn) screen:
- The number of alarms of servo/spindle drive unit
- DA output information
- PLG diagnosis (spindle)
- The maintenance diagnosis information of servo/spindle unit such as alarm cause counter
This operation is protected according to the operation level.
Servo unit
(1)
(2)
(3)
Spindle unit
(1) Display of the DA output data
(1)
(2)
(3)
IB-1501454-C
78