Samsung VP-M102 Owner's Instruction Manual page 45

The built-in clock creates the time stamp. You can adjust the time you use.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
The Mode Selection screen appears.
2. Move the [ / ] switch to select System Settings
3. Move the [ / ] switch to select <Date/Time> and press the [OK] button.
4. Move the [ / ] switch to select <Set Time> and press the [OK] button.
5. Move the [ / ] switch to set time and press the [OK] button.
Move the switch to change the setting and press the [OK] button
[ / ]
to confirm selection and move to the next setting.
6. Press the [Back] button to finish setting.
Note
If you select <Back> in the menu, the previous menu appears.
2
and press the [OK] button.
3
4
5
The built-in calendar creates the date stamp. You can adjust the date you use.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
The Mode Selection screen appears.
2. Move the [ / ] switch to select System Settings
3. Move the [ / ] switch to select <Date/Time> and press the [OK] button.
4. Move the [ / ] switch to select <Set Date> and press the [OK] button.
5. Move the [ / ] switch to set date and press the [OK] button.
Move the switch to change the setting and press the [OK] button
[ / ]
to confirm selection and move to the next setting.
6. Press the [Back] button to finish setting.
Note
If you select <Back> in the menu, the previous menu appears.
2
and press the [OK] button.
3
4
5