System Requirements; Recording With A Dv Connection Cable (Vp-D200I/D230I/D250I/D270I Only) - Samsung VP-D200(i) Owner's Instruction Book

IEEE 1394 Data Transfer

System requirements

®
CPU : faster Intel Pentium III™ 450Mhz compatible.
Operating system : Windows
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
(VP-D200i/D230i/D250i/D270i only)
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
Make sure that DV IN appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
If you want to pause recording momentarily, press the START/STOP button again.
6. To stop recording, press the
Notes
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
Operations are not guaranteed for all the recommanded computer environments mentioned above.
®
98SE, ME, XP, Mac OS (9.1~10.2)
(STOP) button.
ENGLISH
79 79