1 Introduction
The FP16204 Femtocell Access Point from NEC is one of the most technically advanced 3G
access points, yet installation is simple and straight forward.
Plugging the compact unit into your broadband router or cable modem will grant your
existing 3G phone or data‐card exclusive access to its own 3G access point. The Femtocell is
like a low‐power 3G equivalent of a Wi‐Fi hotspot that works with all your 3G devices. It can
be configured to handle four, eight or sixteen voice calls at the same time. There is no need
to worry about dropped calls, poor voice quality or slow data connections, dependable
multi‐megabit speeds are now a reality whereas coverage concerns and network congestion
are things of the past.
The Femtocell has no buttons to press and simply requires a power source and broadband
data connection to operate. The Femtocell automatically communicates with a central
management system over a secure Internet connection. It takes less than 10 minutes to
register and download the latest software, after which point it will be ready to handle your
first call.
It is important that you read each section of this manual before operating the Femtocell.
Please give particular attention to all operating instructions and retain them for future
reference.
3