Suzuki SX4 2016 Owner's Manual page 155

Table of Contents

Advertisement

OPERATING YOUR VEHICLE
Restarting diesel engine after fuel-
empty stop
If the engine stops and the low fuel warn-
ing light and the malfunction indicator light
come on, use the following procedure:
1) Fill the fuel tank.
2) Press the engine switch to change the
ignition mode to "ON" for 5-10 seconds
to feed fuel.
3) Perform above engine starting proce-
dure to start the engine.
If the malfunction indicator light still comes
on after the engine started, there may be
some problem with the engine. Ask your
SUZUKI dealer to have the engine
inspected.
3-17
If the master warning indicator light
blinks and the engine cannot be started
Your keyless push start system remote
controller may not be sensed as being
within the "interior workable area". Try
again after making sure that you have the
remote controller with you. If the engine
still cannot be started, the battery of the
remote controller may be discharged. You
must then use the following method to be
able to start the engine.
EXAMPLE
(1)
(2)
58MST0302
1) Make sure the parking brake is set fully.
2) Manual Transaxle – Shift to "N" (Neu-
tral) and fully depress the clutch pedal.
Hold the clutch and brake pedals fully
depressed.
Automatic transaxle or TCSS – If the
gearshift lever is not in the "P" (Park)
position, shift it to "P". Hold the brake
pedal fully depressed.
3) The "PUSH START SWITCH." mes-
sage will appear on the information dis-
play in the instrument cluster. Press the
engine switch (1).
4) Within about 10 seconds of blinking of
the master warning indicator light in the
instrument cluster, touch the engine
switch with the "LOCK" button end of
the remote controller (2) for about 2
seconds.
NOTE:
• If you still cannot start the engine after
several
attempts
using
the
method, there may be a problem else-
where, such as a low battery. Contact
your SUZUKI dealer for inspection.
• The immobilizer/keyless push start sys-
tem warning light will come on for about
5 seconds while the master warning indi-
cator light is blinking. In addition, the
information display will show a certain
message during this time. Refer to
"Information Display" in the "BEFORE
DRIVING" section for details.
• You may customize the system to cause
the interior buzzer to sound once for the
"remote controller out of sensing range"
warning. Please contact an authorized
SUZUKI dealer for the customization.
83RM0-01E
above

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx4 s-cross 2016

Table of Contents