Hitachi Compute Blade 320 Instruction Manual page 84

3. A list of boot devices appears. Enter the 2-digit number of the boot device to be registered and press the [Enter] key.
Adapter 01: S_ID: xxxxxx PCI Bus , Device , Function (xx,xx,xx)
List of Saved Boot Devices:
00. Clear selected boot entry !!
01. ALPA: xx(xx) WWPN: xxxxxxxx xxxxxxxx LUN: xx HITACHI xxxxxx
02. ALPA: xx(xx) WWPN: xxxxxxxx xxxxxxxx LUN: xx HITACHI xxxxxx
03. ALPA: xx(xx) WWPN: xxxxxxxx xxxxxxxx LUN: xx HITACHI xxxxxx
Select The Two Digit Number of The Desired Boot Device:
Enter <x> to Exit <Esc> to Previous Menu <PageDn> to Next Page
4. The following pop-up screen appears. Enter the 2-digit number (hexadecimal) of LUN of the boot device to be registered and then
press the [Enter] key.
ALPA: xx(xx) WWPN: xxxxxxxx xxxxxxxx
Enter two digit of starting LUN (HEX):
<Esc> to Previous Menu
5. LUs are displayed in the ascending order of LUNs starting with LU of the boot device to be registered. Enter "01" and then press the
[Enter] key.
Adapter 01: S_ID: xxxxxx PCI Bus , Device , Function (xx,xx,xx)
ALPA: xx(xx) WWPN: xxxxxxxx xxxxxxxx
01. LUN: xx HITACHI xxxxxx
02. LUN: xx HITACHI xxxxxx
03. LUN: xx HITACHI xxxxxx
04. LUN: xx HITACHI xxxxxx
Enter a Selection:
B#W: Boot number via WWPN, B#D: Boot number via DID
Enter <x> to Exit <Esc> to Previous Menu
7-12
xxxx
xxxx
xxxx
xxxx
Supplementary Notes on Fibre Channel Adapter Function
xxxx
xxxx
xxxx