RF3401E | Installation Instructions | 1.0 Overview EN | 2 Overview Specifications The RF3401E Point Transmitter is a magnetic and dry Table 1: Specifications contact wireless transmitter used for monitoring doors, windows, or other dry contact devices. This device is equipped with an internal reed contact for...
1 - Acceptable 2 - Not acceptable Figure 3: Point Transmitter The ID label removed to show detail. 1 - Wall tamper breakout area 2 - Wire entrance Bosch Security Systems | 6/03 | 42597E...
Page 4
RF3401E | Installation Instructions | 3.0 Mounting EN | 4 5. Tear off the loose portion of the ID label to use in 9. If the installation requires additional security, use an panel programming (see Section 5.0 Panel additional panhead screw to mount the point Programming).
1.5 kΩ Setting Up Magnetic or External Contacts 2.2 kΩ The RF3401E can monitor its internal reed contact or an external dry contact. If using the RF3222E Receiver, the RF3401E cannot monitor both magnetic and 1 - Up to 6 m (19 ft.) external contacts simultaneously.
EN | 6 Panel Programming A two-part ID sticker (see Figure 11) is located on the housing of the RF3401E. The number on this sticker is required to program the point transmitter into the control panel. Refer to your panel's Programming Guide for programming information on wireless type devices.
Page 7
PROTÓTIPO DO SELO ANATEL E DA RESOLUÇÃO 365 Código EAN – Modelo RF3401E: (01)07891009341408...