Pair Creation Using A Consistency Group; Updating The V-Vol - Hitachi AMS2100 User Manual

C:\HORCM\etc>pairdisplay -g VG01
group PairVOL(L/R) (Port#,TID,LU-M) ,Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M
VG01 oradb1(L)
VG01 oradb1(R)
VG01 oradb2(L)
VG01 oradb2(R)
VG01 oradb3(L)
VG01 oradb3(R)

Pair creation using a consistency group

C:\HORCM\etc>paircreate -g VG01 -vl -m grp
C:\HORCM\etc>pairevtwait -g VG01 -s pair -t 300 10
pairevtwait : Wait status done.
C:\HORCM\etc>pairsplit -g VG01
C:\HORCM\etc>pairevtwait -g VG01 -s psus -t 300 10
pairevtwait : Wait status done.
C:\HORCM\etc>pairdisplay -g VG01
group PairVOL(L/R) (Port#,TID,LU-M) ,Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M
VG01 oradb1(L)
VG01 oradb1(R)
VG01 oradb2(L)
VG01 oradb2(R)
VG01 oradb3(L)
VG01 oradb3(R)
NOTE: When using the consistency group, the -m grp option is required.
However, the -split option and the -m grp option cannot be used at the
same time.

Updating the V-VOL

C-12
Hitachi AMS 2000 Family Copy-on-Write SnapShot User Guide
•
(CL1-A , 1, 2-0 )8100012385000123
(CL1-A , 1, 3-0 )8100012385000123
(CL1-A , 1, 2-1 )8100012385000123
(CL1-A , 1, 4-0 )8100012385000123
(CL1-A , 1, 2-2 )8100012385000123
(CL1-A , 1, 5-0 )8100012385000123
A consistency group insures that the data in two or more S-VOLs
included in a group are of the same time. For more information, see
Consistency group (CTG) on page
To create a pair using a consistency group
1. Execute the pairdisplay command to verify that the status of
the SnapShot volumes is SMPL. In the following example, the
group name in the configuration definition file is VG01.
2. Execute paircreate -m grp; then, execute pairevtwait to
verify that the status of each volume is PAIR. For example:
•
3. Execute pairsplit; then, execute pairevtwait to verify that the
status of each volume is PSUS. For example:
•
4. Execute pairdisplay to verify the pair status and the
configuration. For example:
•
(CL1-A , 1, 2-0 )8100012385000123
(CL1-A , 1, 3-0 )8100012385000123
(CL1-A , 1, 2-1 )8100012385000123
(CL1-A , 1, 4-0 )8100012385000123
(CL1-A , 1, 2-2 )8100012385000123
(CL1-A , 1, 5-0 )8100012385000123
•
To update the V-VOL
In the examples below, the group name in the configuration
definition file is VG01.
Operations using CCI
2.P-VOL PSUS,-----
3.S-VOL SSUS,-----
2.SMPL ----,-----
4.SMPL ----,-----
2.SMPL ----,-----
5.SMPL ----,-----
1-6.
2.P-VOL PSUS,-----
3.S-VOL SSUS,-----
2.P-VOL PSUS,-----
4.S-VOL SSUS,-----
2.P-VOL PSUS,-----
5.S-VOL SSUS,-----
---- -
---- -
---- -
---- -
---- -
---- -
---- -
---- -
---- -
---- -
---- -
---- -