Enhanced Charging Service Configuration
file [ charging-service-name { include | omit } ] [ compression { gzip | none } ] [
current-prefix <string> ] [ delete-timeout <seconds> ] [ directory <directory_name> ] [
edr-format-name ] [ exclude-checksum-record ] [ field-separator { hyphen | omit |
underscore } ] [ file-sequence-number rulebase-seq-num ] [ headers ] [ name <file_name> ]
[ reset-indicator ] [ rotation [ num-records <number> | time <seconds> | volume <bytes> ]
] [ sequence-number { length <length> | omit | padded | padded-six-length | unpadded } ]
[ storage-limit <limit> ] [ single-edr-format ] [ time-stamp { expanded-format | rotated-
format | unix-format } ] [ trailing-text <string> ] [ trap-on-file-delete ] [ xor-final-
record ] +
exit
udr-module active-charging-service
file [ charging-service-name { include | omit } ] [ compression { gzip | none } ] [
current-prefix <string> ] [ delete-timeout <seconds> ] [ directory <directory_name> ] [
exclude-checksum-record ] [ field-separator { hyphen | omit | underscore } ] [ file-
sequence-number rulebase-seq-num ] [ headers ] [ name <file_name> ] [ reset-indicator ] [
rotation [ num-records <number> | time <seconds> | volume <bytes> ] ] [ sequence-number {
length <length> | omit | padded | padded-six-length | unpadded } ] [ storage-limit
<limit> ] [ time-stamp { expanded-format | rotated-format | unix-format } ] [ trailing-
text <string> ] [ trap-on-file-delete ] [ udr-seq-num ] [ xor-final-record ] +
end
Notes:
The
cdr
in one mode prevents the configurations from being applied in the other mode.
If the
edr-module active-charging-service
reporting
When the configured threshold limit is reached on the hard disk drive, the records that are created dynamically in
the /mnt/hd-raid/data/records/ directory are automatically deleted. Files that are manually created should be
deleted manually.
The
use-harddisk
Verifying your Configurations
To view EDR-UDR file statistics, in the Exec Mode, enter the following command:
show active-charging edr-udr-file statistics
Pushing EDR/UDR Files Manually
To manually push EDR/UDR files to the configured L-ESS, in the Exec mode, use the following command:
cdr-push { all | local-filename <file_name> }
Notes:
Before you can use this command, the CDR transfer mode and file locations must be set to push in the
EDR/UDR Module Configuration Mode.
The
cdr-push
command keywords can be configured either in the EDR or the UDR Configuration Mode. Configuring
keywords, by default the EDR module is enabled for charging EDRs.
keyword is only available on the ASR 5000.
command is available in the Exec Mode.
command is configured without the
Cisco ASR 5x00 Enhanced Charging Services Administration Guide ▄
Configuring Enhanced Features ▀
or
charging
105