Advertisement
3
Charge the CheckMaster
Charge the CheckMaster for a minimum of four hours before first
use.
b
3
a
a
Connect the mains adaptor to the CalMaster2.
b
Plug the CalMaster2 mains adaptor into the power socket.
c
Recharge for at least four hours.
4
Install the CalMaster2 IRIS software
Insert the CD into the computer; the install program should start
automatically. If it does not, from the Windows Start menu, select
Run... and type D:\Setup.exe (where D is the drive letter of the CD)
and click OK or press Enter.
Follow the on-screen instructions to install.
To run the software, select Start | Programs | ABB | CalMaster2.
Refer to the instruction manual (IM/VMC2) for complete details of
the CalMaster2 IRIS software.
The Company's policy is one of continuous product
improvement and the right is reserved to modify the
information contained herein without notice.
Printed in UK (09.06)
ABB Limited
ABB Inc.
Oldends Lane, Stonehouse
125 E. County Line Road
Gloucestershire
Warminster
GL10 3TA
PA 18974
UK
USA
Tel:+44 (0)1453 826661
Tel:+1 215 674 6000
Fax:+44 (0)1453 829671
Fax:+1 215 674 7183
5
Register CalMaster2
From
the
CalMaster2... A registration screen appears:
c
2
1
Note. The 'Customer identification number' is printed on the
label of the CD.
1. Type the User name, Company name and Customer
identification number.
2. Select to either create a PDF of the registration or send the
details by email:
–
–
3. Click
calmaster@gb.abb.com
–
–
© ABB 2006
4. Click Close to exit CalMaster2.
IM/VCM2/QRG Issue 2
CalMaster
software,
select
Help
To create a pdf, select the Create a pdf file for
printing or faxing check box.
To send an email, leave the Create a pdf file for
printing or faxing check box unselected.
Next.
Either
an
e-mail
is
automatically or a PDF is created:
If an e-mail was sent, a response is received within 24
hours. A confirmation message that the e-mail has
been sent appears.
If a PDF was created, print the PDF and either send it
to:
ABB Limited
CalMaster Helpline
Oldends Lane, Stonehouse
Gloucestershire
GL10 3TA
UK
or Fax it to: +44 (0)1453 829671
6
Connect the CheckMaster to the Computer
|
Register
With the CalMaster2 software running:
c
a
Slide the cover down to reveal the serial port.
b
Connect the RS232 cable to the CalMaster2
c
Connect the RS232 cable tothe computer.
From the CalMaster2 IRIS software, click the
software checks that the CalMaster2 is connected.
Note. As this is the first time that the CheckMaster has been
used, no flow meters are listed.
7
Verify a Flow Meter
Follow the detailed instructions in the manual (IM/VCM2) to
sent
to
connect to a flow meter.
a
b
button. The
Advertisement
