Bosch MIC7000 Quick Installation Manual page 6

en | Install the MIC7000 Illuminator MIC7000 Illuminator
6
Notice!
This product has been tested according to standard
IEC62471:2006 "Photobiological safety of lamps and
lamp systems". The product emissions exceed the
EXEMPT Group limit for both Retinal Blue Light and
Cornea/Lens infrared hazard as defined by IEC
62471:2006. The product was found to meet the Risk
Group 1 exposure limits for IR and White LEDs.
Refer to the MIC7000 Operation Manual for complete
information on illumination safety.
Notice!
If the MIC camera will have both illuminator and
sunshield accessories, install the illuminator first.
Extreme low temperature MIC7000 models do not
support the illuminator.
1. Mount the camera or stand it temporarily in the
packaging foam on a stable surface before proceeding.
(Refer to the Operation Manual.)
Note: If the camera will be mounted inverted, you must
rotate the tilt head before attaching the illuminator.
Apply power and connect to your network as illustrated
in the figure below.
2014.08 | 1.2 | F.01U.306.503 Bosch Security Systems