Zone Operation And Simultaneous Operation - Toshiba BMS-SM1280HTLE Owner's Manual

Smart Manager
6
Zone Operation and Simultaneous
Operation
1
2
3
(Example) Performing zone operation (LINE 1, ZONE 8, GROUP 34~42 cooling at 24°C, air volume: AUTO) and
simultaneous operation (LINE 1, cooling at 24°C, air volume: AUTO)
Power on
1 Line switching
ALL ZONE GROUP
2 / /
3 Zone switching
4 ON
5 Operation mode switching
6 Air volume switching
7 Temperature setting
8 Central/individual
(Only in the central control
mode)
STOP
* When or
* Settings when ALL or ZONE is selected: Only the contents that are set in the ALL or ZONE mode are set in each
air conditioner.
(Example) When the
air conditioner.
* Indications on the LCD of the Smart Manager remain unchanged even when operation is stopped.
LINE ZONE
Zone operation ( 1,
24°C, air volume: AUTO)
Turn on the power of the remote controller (Buttons on the remote controller are disabled while
is displayed, but this is not a fault.)
Select line 1 with the
Select with the
ZONE ZONE
Select 8 with the
buttons. ("8" is displayed.)
Press the button to start operation. (Operation starts one group after another at about one-
second interval.)
Select COOL mode with the
Select AUTO air volume with the
Set temperature to 24°C with the
24°C
Change the setting with the
Individual: Controls with the remote controller are possible.
CENTRAL 1
:Disables operation start/stop using the remote controller.
CENTRAL 2
:Disables operation start/stop, operation mode switching, and temperature setting
using the remote controller.
CENTRAL 3
:Disables operation mode switching and temperature setting using the remote
controller.
CENTRAL 4
:Disables operation mode switching using the remote controller.
CENTRAL
" " is displayed for central or individual control other than above.
Press the button to stop operation.
is displayed, the button is disabled.
button is pressed in the ALL or ZONE mode, only the operation mode is set in each
8, cooling at Simultaneous operation (
24°C, air volume: AUTO)
button.
button. Select
and
button.
button.
SET TEMP.
button.
Owner's Manual
4
STOP
5
7
6
8
LINE
1, cooling at
with the button.
(Not necessary)
("1" is displayed.)
and buttons.
EN
-EN
11