Supplemental Specifications; Actuator Travel; Housing; Transmission Data And Contributing Factors - ABB PositionMaster EDP300 Operating Instruction

PositionMaster EDP300 DIGITAL POSITIONER | OI/EDP300-EN REV. D

14 Supplemental specifications

Actuator travel

Rotation angle
Used range 25 ... 270° for rotary actuator
25 ... 60° for linear actuator
Actuator travel limit Min. and max. limits, freely configurable in
range 0 ... 100 %
Actuator travel (min. range > 20%
Actuator travel time Range of 0 ... 200 seconds, separately for each
prolongation direction
Dead band time limit Setting range 0 ... 200 seconds (monitoring
parameter for control until the deviation
reaches the dead band)

Housing

Material / Degree of protection
Aluminum with 0.1% copper Optional stainless steel 1.4404 (316L)
Degree of protection IP 65 / NEMA 4X (NEMA 4X does not permit
overhead mounting)
Surface / color (aluminum housing only)
Dipping varnish With epoxy resin, stove-hardened
Housing varnished black RAL 9005
RAL 9002
Weight
Aluminum 2.4 kg (5.29 lb)
Stainless steel 1.4404 (316L) 5.5 kg (12.13 lb)
Mounting orientation
Any
Transmission data and contributing
factors
Output Y1
Increasing set point signal
Decreasing set point signal
Action (set point signal)
Increasing set point
Decreasing set point
Characteristic curve (actuator travel = f {set point signal})
Linear Equal percentage 1:25 or 1:50 or 25:1 or 50:1*
Deviation < 0.5 %
Configurable zone 0 to 100 %,
Configurable dead zone 0.1 to 10 %,
Resolution (AD-conversion) > 16,000 steps
Sampling frequency 20 ms
Ambient temperature effect < 0.5 % for each 10 K
Influence of vibration Standard design:
Marine version:
* freely configurable with 20 reference points

Seismic vibration

Meets requirements of DIN / IEC 60068-3-3 Class III for strong
and strongest earthquakes.

Influence of mounting orientation

Not measurable.

Noise emissions

Max. 100 db (A)
Noise-reduced version max. 85 db (A)
Increasing pressure at output
Decreasing pressure at output
= actuator position 0 to 100 %
= actuator position 0 to 100 %
< 1 % to 10 g and 80 Hz
< 1 % to 4 g and 100 Hz – EDP300 and
remote design (control unit) < 1 % to 10 g
and 100 Hz for remote design (position
sensor)
79
0 to 100 %
0 to 100 %
4 to 20 mA
20 to 4 mA