Table of Contents
Advertisement
1
4
Model 68036
1. Switch in run position
2. Switch in stop position
Choke Lever
Use the choke lever (Figure 6 or Figure 7) to start a cold
engine. Before pulling the recoil-starter handle, move the
choke lever to the closed position. Once the engine is
running, move the choke lever to the open position. Do not
use the choke if the engine is already warmed up or if the
air temperature is high.
1
2
Models 68034 and 68035
1. Open position
2. Closed position
2
3
Figure 5
3. Stop
4. Run
3
Figure 6
3. Choke lever
G0231 13
1. Choke lever in the Open
position
Throttle Lever
The throttle lever controls the engine speed. When the lever
is in the slow position, the engine runs at idle speed. This is
also the starting position. When you move the lever to the
fast position, the centrifugal clutch engages, and the shoe of
the machine vibrates and compacts.
3
2
1
G023107
1. Fast position
2. Variable control speed
7
1
Figure 7
Model 68036
2. Choke lever in the Closed
position
Figure 8
3. Slow position
G023112
G020101
Advertisement
Table of Contents
