Advertisement
7. If the connection fails, check all cables and return to Step 2.1, and then select
<Repair>.
In "Local Connection Status" window, click on <Support> tab and select
Default Gateway> (if it matches the gateway as found in [cmd.exe] window,
and then check connection again.)
Step 3. Connect DVR to the router
Step 3.1 Configure DVR router settings
1. Select [Main Menu ; Parameter].
2. Select <Network> window.
3. Select <Static>. The connection setting window will be displayed.
4. Move the cursor to the desired item.
5. Manually input <IP address> when static connection is selected.
The IP address consists of 4 fields, and the first 3 fields should be same to
those of <Default Gateway> address of your computer which can be found in
Step 2, and the last field should be an unoccupied figure between 2 and 254.
For example, IP: 192.168.1.200.
6. Enter <Gateway> and < Subnet Mast> (the same parameters as found in your
computer in Step 2).
7. Set <Client Port> and <HTTP Port>.
Refer to the next page for setting up the Client port and HTTP port.
What's a Port?
Port 80 is generally used for <HTTP Port> in the HTTP protocol.
If no port is set, it will be automatically set to 80 in the HTTP protocol.
For example, http://www.yahoo.com and http://www.yahoo.com:80 will be deemed as equal.
Therefore, if < HTTP Port> has been set to any port other than 80, then you have to specify the address in the following form:
http://<IP address>:<HTTP Port>,
For example, http://192.168.1.200:80 to connect to the DVR using internet browser. It is recommended to set <HTTP Port> to a
port number between 1024 and 65535.
If the port is not set to 80, access may be limited (depending on the security strategy or firewall configuration of your ISP).
DVR uses <HTTP Port> and <Client Port> for Web connection.
<HTTP Port> is used for access to DVR through the Web Browser.
<Client Port> is used to receive video sent from DVR through the Web browser.
When several DVRs are configured, the <HTTP Port> and <Client Port> settings should be configured respectively for each DVR.
For example, DVR #1: 4520, HTTP port: 80
DVR #2: 4529, HTTP port: 2000
English-4
Advertisement
