Chapter 4 - 7SR45 Data Communications Definitions
Section 1: Introduction
This section describes how to use the Communication Interface with a control system or interrogating
computer.
The interface is compatible with control and automation systems using industry standard
communications protocols IEC 60870-5-103 and MODBUS-RTU.
Reydisp Evolution Software is available, for computers running Microsoft Windows™ to connect to
devices to provide operational information, post-fault analysis, setting interrogation and editing
facilities, etc.
The configuration software can be downloaded from our website
https://w3.siemens.com/smartgrid/global/en/products-systems-solutions/downloads/Pages/Reyrolle-
Downloads.aspx.
This section specifies connection details and lists the information available through the individual
protocols.
NOTE:
The 7SR45 Argus Dual Powered Relay variant only supports the data communication.
© 2018 Siemens Protection Devices Limited
Chapter 4 Page 3 of 20