4-3. Connecting audio cables
This example requires the following audio cables:
1.
A D-sub cable (D-sub 25pin Male – D-sub 25pin Male)
2.
3x Breakout cables (D-sub 25pin Male – 8x XLR Male)
3.
An AES/EBU cable (D-sub 25pin Male – D-sub 25pin Male)
4.
26x XLR cables (6 for microphones, 10 for speakers, 6 for Cues, 2 for Studio
Speakers and 2 for headphone amp)
1. For connecting MLA8 outputs and MMP1 analog inputs, use a 25-pin D-sub cable.
2. For MMP1 analog outputs and Nuage I/O inputs/outputs, use a breakout cable with a
D-sub 25pin Male connector and 8 XLR connectors.
[D-sub 25pin cable (Male-Male)
23