Table of Contents
Advertisement
Installation Instructions
Wood Stud
NOTE:
Refer to Table 1 for appropriate hardware and pilot hole
sizes for various wall types.
1.
Use one 1/4 x 2-1/2" lag bolt (J) through product and into
pilot hole. (See Figure 31)
2.
Repeat for remaining pilot hole.
1
(J) x 2
2
Figure 31
Concrete
NOTE:
Refer to Table 1 for appropriate hardware and pilot hole
sizes for various wall types.
1.
Install an anchor (K) into each pilot hole using a hammer,
making sure that the anchor is flush with the wall.
2.
Use one 1/4 x 2-1/2" lag bolt (J) through product into each
anchor in wall.
(J)
2
Figure 32
1
(K)
AN2 Series
17
Advertisement
Table of Contents
