SPO
HONEYWELL PC42t User Guide
Clicking the Advanced options... button will open a window, where you can set the starting
position for printing and by doing so correct the printout position on the label. If necessary,
offset the printout horizontally by 2.0 mm (Figure 6).
Figure 6: Printout position settings ("Horizontal Offset", "Vertical Offset")
On the second tab (Graphics), select None under "Dithering" (Figure 7).
Figure 7: Print settings (Graphics, "Dithering")
On the third tab (Stock), select Thermal Transfer under "Print method" (Figure 8).
© IZUM, 6. 3. 2018, SPO-NA-EN-316, V1.0
9/13