Table of Contents
Advertisement
n
Select to connect to a
Residential Gatewa
n
Set the correct
Network Name and Encryption Ke
Installation for Windows - Set Basic Parameters
1. In the field
Network Name
you want to connect. The Network Name has to match the unique RG ID (which can be found on the device).
2. In the
field enter the last 5 digits of the RG ID (default).
Encryption Key
NOTE:
If you changed the default Encryption Key on the Residential Gateway (RG) you will need to enter the new
value here as well.
3. Click
to confirm and return to the Add/Edit Configuration Profile window.
OK
4. Click
OK
again to finish the installation.
Installation for Windows - Set Basic Parameters
Basic Settings for Peer-to-Peer
Workgroups
2
If you wish to connect to a Peer-to-Peer workgroup, use the Add/Edit Configuration Profile window to:
n
Select to connect to a
Peer-to-Peer Workgrou
n
Set the correct
Network Name and Encryption Ke
1. In the field
Network Name
The Network Name can be any alphanumeric string in the range of "a" to "z", "A" to "Z" and "0" to "9" with a
maximum of 32 characters (case-sensitive).
n
If there is already a Peer-to-Peer group with this name available your computer will automatically connect to
this workgroup.
n
If there is not yet such a group available, your computer will automatically start one with this name.
2. Click
to confirm and return to the Add/Edit Configuration Profile window.
OK
3. Click
again to proceed with the installation.
OK
Installation for Windows - Finish the Installation
Finish the Installation
When you have finished "Set Basic Parameters", click the
window and to proceed with the installation process. Windows will finish building the driver configuration
database and copy some files to your computer's hard disk.
y.
y.
enter the 6-character RG ID to define the same of the wireless network to which
p.
y.
define the name of the wireless network to which you want to connect.
2
OK
button to close the Add/Edit Configuration
Advertisement
Table of Contents
