Table of Contents
Advertisement
Trouble
Trouble
POWER/CHARGE lamp
starts blinking when the
monitor is closed.
Recording cannot be
performed.
Recording stops
automatically.
Sound or video is
interrupted.
Desired files cannot be
found on the index
screen (thumbnail
display).
3D images cannot be
seen on a 3D
compatible TV properly.
The lamp does not flash
during battery pack
charging.
This unit heats up.
34
Action
The battery pack is being charged.
Check the A/B button.
Set to the recording mode by tapping the
q button on the screen.
Turn off this unit, wait for a while, and turn
it on again. (This unit stops automatically
to protect the circuit when the
temperature rises.)
Recording stops automatically after 12
hours of continuous recording.
Sometimes playback is interrupted at the
connecting section between two scenes.
This is not a malfunction.
Press the 3D button to switch to the
desired mode for playback.
Set "SYSTEM SELECT" in the video
recording menu to "60i" (or "50i") or "24p".
Set "3D VIDEO REC FORMAT" in the
video recording menu to "MP4(MVC)" or
"AVCHD".
Tap I/J to select the desired media for
playback.
Set "HDMI OUTPUT" in the "COMMON"
menu accordingly.
Check the remaining battery power. (When
the battery pack is fully charged, the lamp
does not flash.)
When charging in either a hot or cold
environment, ensure that battery is being
charged within the permitted temperature
range. (Otherwise, charging may stop to
protect the battery pack.)
This is not a malfunction. (This unit may
become warm when used for a long time.)
Page
12
9
22
9
19
9
12
Advertisement
Table of Contents
