ABB IRC5 Compact Product Manual page 60

2 Installation and commissioning
2.6.8 Descriptions for contacts XS7, XS9, XS10, XS11, XS12 and XS13
Continued
Purchasing information for customer cable connector:
Customer connector type
COMBICON connector,
MSTB 2,5/6-STF-5,08
XS11 DeviceNet
This connector is internally connected with DeviceNet - master bus.
It contains a DeviceNet signal.
For connection details, see circuit diagram for IRC5 Compact, 3HAC031403-003.
Purchasing information for customer cable connector:
Customer connector type
COMBICON connector,
MSTB 2,5/5-STF-5,08
The bridge connector can be bought from ABB (3HAC037705-001). If it is bought
from the manufacturer, see circuit diagram (3HAC031403-003) for connection
details.
XS12 Additional axis (not used in this release)
This connector is internally connected with drive DSQC431.
It contains the following signal:
For connection details, see circuit diagram for IRC5 Compact, 3HAC031403-003.
XS13 Axis selector
This connector is internally connected with axis computer and safety board.
It contains the signal RS485.
For connection details, see circuit diagram for IRC5 Compact, 3HAC031403-003.
60
Note
Total customer usage for 24V power supply from XS10 must not exceed 6A.
• Signal for external drive.
© Copyright 2009-2013 ABB. All rights reserved.
Recommended supplier
Phoenix
Recommended supplier
Phoenix
Order number
1778027
Order number
1778014
3HAC035738-001 Revision: E