Parameter Scanning; Linear Code Type Security Level; Linear Security Level 1; Linear Security Level 2 - Philips SpeechMike Configuration Manual

10

Parameter Scanning

To disable decoding of parameter bar codes, scan the bar code below. The
still be decoded. To enable decoding of parameter bar codes, scan
Defaults. .

Linear Code Type Security Level

The SpeechMike Barcode offers four levels of decode security for linear code types (e.g. Code 39, Interleaved 2 of
5). Select higher security levels for decreasing levels of bar code quality. As security levels increase, the scanner
aggressiveness decreases.
Select the security level appropriate for your bar code quality.

Linear Security Level 1

The following code types must be successfully read twice before being decoded:

Linear Security Level 2

All code types must be successfully read twice before being decoded.
Revision: 2.0 , technical changes excepted
*Enable Parameter Scanning
Disable Parameter Scanning
Code Type
Codabar
MSI
D 2 of 5
I 2 of 5
*Linear Security Level 1
Linear Security Level 2
Advanced Scanner Configuration Guide
S e t D e f a u l t s
*
Enable Parameter Scanning or Set Factory
Length
All
4 or less
8 or less
8 or less
parameter bar code can
'
s