Step 3. Configuring Network Connection Settings; Selecting The Ssid For The Wireless Network - Philips TC20 Installation Instructions And Use

Configuring Wireless Adapter Settings
Select the certificate, and touch
b
In the Select a Certificate file browser, touch the
c
Private Keys
Select the certificate and touch
d
When prompted, type the private key password, and touch
e
Touch
f
The private key is imported.
Remove the USB stick from the port and replace it with the AmbiCom wireless USB
9
dongle.
Configuration is now complete. The rest of the EAP-TLS configuration is described in
"Configuring a WPA or WPA2 EAP-TLS Connection" on page 15.

Step 3. Configuring Network Connection Settings

After installing the wireless card and loading certificates (if needed) as described in the
previous sections, you must select the SSID for the network connection to use, choose
encryption/authentication methods to use, and specify any required credentials to permit
access.
N O T E If you are going to use EAP-TLS authentication, proceed directly to "Configuring a WPA or WPA2
EAP-TLS Connection" on page 15.

Selecting the SSID for the Wireless Network

To select the wireless network to use
Ensure the AmbiCom wireless USB dongle is inserted in the USB port on the cardiograph.
1
On the main screen, touch
2
Touch
3
In the
4
The NetUI utility appears, displaying available networks in the
The list refreshes automatically.
10 PageWriter TC20 Wireless LAN Installation Instructions
.
in the Certificates window.
OK
Setup
Configure ECG Network Settings
Wireless LAN Adapter Settings
.
Import
Type
.
OK
on the tool bar.
, then touch the
section, touch
Configure
dropdown arrow and select
.
OK
tab.
Wireless Network
.
Wireless Information
tab.