Sony MEX-BT5100 Quick Manual page 2

Step 1 –  Pairing (Searching from a BLUETOOTH device)
(Bluetooth)
Joystick
Searching for this unit from a BLUETOOTH
device
Check that "Visibility" in the Bluetooth Settings menu
is set to "Show."

1
1 Press .
2 
Select "Signal"  "ON."
2
3 
3 Select "Visibility"  "Show."
4
4
Set the connecting device to search.
5
5 When "Allow Connection?" appears on this
unit, select "yes."
6
6
Input the passcode of the connecting
7
device.
7 Press the joystick to confi rm.
Step 2 BLUETOOTH connection
(Bluetooth)
Joystick
Devices are registered once paired and connected
with this unit. You can select the registered device and
connect it.
1 
1 Press .
2 
Select "Connectivity"  "Handsfree
2
Devices" or "Audio Devices."
The list of registered devices appears.
3
3
Select the device to connect.
4
4 Select "Connect."
"Connected" appears and connection is complete.
" " or " " appears during connection.
To stop the connection

Select "Disconnect"  "yes" in step 4.

 About connection indicators
The following indicator appears in the display of this
unit during BLUETOOTH connection.
: during HFP connection
: during A2DP connection
Step 3 –  Handsfree talking
(Bluetooth)
(MENU)
Joystick
(CALL)
(OFF)
 Receiving calls 
When receiving a call, the ring tone is output from
your car speaker(s).
1  
1 When receiving a call, press , 
 or .
The phone call starts.
The built-in microphone of this unit will pick up
your voice.

1
To reject a call
1 Press .

 Making calls

1
1 Press . 2
2
Select "Dial." 3
3 Input the phone number using the joystick
or card remote commander.
To input "+," press and hold the 0 button on the
4
card remote commander.
4
Press the joystick to start the call.
You can also call from the following CALL menus.
"Dialed Calls"/"Received Calls"/"Phonebook"/"Preset

Dial"
 Ending calls 
1
1 Press .
Step 3 –  Music streaming
(SOURCE)
(6)
Joystick (PAUSE)
 Listening to music from an audio 
device
You can listen to music of an audio device on this unit
if the audio device supports A2DP of BLUETOOTH
1
technology.
1 Connect this unit and the BLUETOOTH
2
audio device.
3 
" " appears during connection.
2
Turn down the volume on this unit.
4
Press  repeatedly until
3
"Bluetooth AUDIO" appears. 5
4
Operate the audio device to start playback. 
5 Adjust the volume on this unit.
 Operating an audio device with this
unit
–
You can perform the following operations on this unit
–
if the audio device supports AVRCP of BLUETOOTH
technology. (The operation differs depending on the

–
audio device.)
– To skip tracks, push the joystick left/right.
– To reverse/fast-forward a track, push and hold the
joystick left/right.
– To pause, press  (PAUSE).
Operations other than the above should be performed
on the audio device.
Troubleshooting
This unit cannot detect the connecting device.
Check the BLUETOOTH setting of the connecting
device.
The connecting device cannot detect this unit.
•
• Set "Signal" to "ON."
•
• Set "Visibility" to "Show."
•
• While connecting to the other BLUETOOTH
device, this unit cannot be detected from another
device. Disconnect the current connection and
search for this unit from another device. The
disconnected device can be reconnected by selecting
from the list of registered devices.
Pairing failed in Time Over.
Depending on the connecting device, the time limit
for pairing may be short. Try completing the pairing
within the time by setting a single digit passcode.
•

Connection is not possible.
• Depending on the other device, searching from this •
unit may not be possible.
 Search for this unit from the other device. 
• Depending on the status of the other device,
•
searching from this unit may not be possible.
 Search for this unit from the other device.
• Check the pairing procedures referring to the
manual of the other device, etc., and perform the
operation again.
Some functions do not work.
Check that the connecting device supports the
functions in question.
Support site
If you have any questions or for the latest support information
on this product, visit the web site below:
http://www.sony-asia.com/caraudio/ http://www.sony-asia.com/caraudio/