Stroke Input Method - Nokia 6108 Manuallines

RH-4_FCC_2003-4-16.fm Page 23 Friday, April 18, 2003 4:34 PM
2. Press once to input the first
tone, twice to input the second
tone, and so on. Press
times to input the neutral tone.
Press Clear to delete the pinyin
symbols (or tone mark) to the
left of the cursor. Press and hold
Clear to delete all the inputted
pinyin symbols and tone mark.
3. Press to get the next
possible pinyin combination.
Scroll through the candidate
Chinese characters by pressing
the scroll keys , ,
and choose the right Chinese
character by pressing OK.
4. The phone predicts the next
Chinese characters if they are
available. Choose from among
the candidates. If you don't need
them, you can input the pinyin
symbols for the next Chinese
character right away; or press
Back first, then input the pinyin
symbols.
If no pinyin symbol is inputted,
pressing Clear deletes the
Chinese character to the left of
the cursor; pressing and holding
Clear deletes all the inputted
Chinese characters. Use the
scroll keys , ,
move the cursor.

Stroke input method

The strokes constituting Chinese
characters have been divided into
five categories: Horizontal,
Vertical, Left-falling, Dot and
five Turning. Each category
corresponds to a number key from
to
The strokes are classified according
to the following table:
or ,
or to
respectively.
23