Troubleshooting - LG LAN-9600R Owner's Manual

Troubleshooting

Cannot identify the current location. (GPS not receiving)
GPS cannot be used indoors and must be connected to a power source with ACC in a
vehicle in a location where the signal from the sky can be received easily.
When initially connecting the GPS, it usually takes about 10 minutes to be working
normally, but the connection speed can differ depending on the weather condition, and
surrounding obstacles.
If the GPS connection is unstable for a long period of time, try the following.
• Check if the product is connected to a power source.
• Check if the back of the GPS product is in a location where the sky can be seen well.
• If there are high buildings or if you are under a tree, move to a location where there aren't
any obstacles.
• Check the GPS receiving condition from the GPS menu.
Cannot hear the voice guide.
Check that volume is set to Mute to very small volume in the setup menu.
No guide sound comes out in the case of straight sector or not in the guide time.
In this case, an appropriate sound in the current position if pressing the NAVI button.
There is a difference between the driving road and the road on the
map in the product.
Even though GPS is usually very accurate, there is a small margin for error.
When the GPS receiver is installed, there can be an error of about 10m. But for newly
built roads, the problem could come from the data update to the map.
Cannot see the map.
Perhaps you cannot see the map even when you have executed the navigation menu.
This happens when the data within the memory is damaged. Delete all the data in the
memory and install the data again.
If the issue persists after installation, contact the A/S center.
Map data is not newly updated.
The information registered in the map data is not recent.
The information registered in the map data must be updated on a regular basis.
81