System Mode; Color Settings - Panasonic AU-EVA1 Manual

3. MENU settings (SYSTEM SETTINGS)

3-1-1. SYSTEM MODE

Menu item
FREQUENCY Set the system frequency
SDI RAW Set resolution for RAW data
out.
See
4-9. Understanding RAW
out
SENSOR Set the sensor drive mode
MODE
See 4-1. Understanding
Variable Frame Rate (VFR)
recording (P.59) for the
details.
MAIN PIXEL Set resolution for main
recorder.
MAIN Set the main record codec
CODEC
* SENSOR MODE, MAIN PIXEL, and MAIN CODEC settings cannot be changed when SDI RAW
item is in use.

3-1-2. COLOR SETTINGS

Menu item
MAIN Set
recorded as the system color.
SDI OUT Set the COLOR of image to
be output from SDI OUT.
HDMI OUT Set the COLOR of image to
be output from HDMI OUT.
LCD OUT Set the COLOR of image to
be output from LCD OUT.
About V-Log and V-709
V-Log is an image capture log curve that achieves wider latitude (+14 stops)
V-Log
and fine scene gradations.
V-709 is a gamma curve, whose characteristic allows direct pre-viewing of
V-709
camera images on a TV monitor.
Description
(P.71) for the details.
Description
the COLOR to be
Value (factory default setting underlined)
23.98p, 24.00p, 25.00p, 29.97p, 50.00p,
59.94p, 50.00i, 59.94i
OFF, S35 5.7K, CROP 4K, CROP&MIX 2K
S35 5.7K,
S35 MIX2.8K,
4/3 CROP&MIX 2.2K
4096x2160, 3840x2160, 2048x1080,
1920x1080, 1280x720
MOV
420LongGOP150M, 420LongGOP100M,
420LongGOP50M, 422LongGOP150M,
422LongGOP100M, 422LongGOP50M
AVCHD
AVCHD PS, AVCHD PH, AVCHD HA, AVCHD
PM
Value (factory default setting underlined)
V-Log, SCENE1(eV-LOOK1),
SCENE2(eV-LOOK2), SCENE3(BC-LOOK1),
SCENE4(BC-LOOK2), SCENE5 (HDR)
When MAIN item is set to "V-Log"
V-Log, V-709
When MAIN item is set to "SCENE *"
The SCENE* is applied.
When MAIN item is set to "V-Log"
V-Log, V-709
When MAIN item is set to "SCENE *"
The SCENE* is applied.
When MAIN item is set to "V-Log"
V-Log, V-709
When MAIN item is set to "SCENE *"
The SCENE* is applied.
28