GE WattStation Installation And User Manual page 6

WARNING:
panelboard or load center before working inside the equipment or
removing any component. Do not remove circuit protective devices or
any component until the power is turned OFF
2.2.2 Installation
Step 1: Carefully unwrap the packaging and make sure the following items
are present:
- Wall Mounted WattStation unit
- Mounting wall bracket
- Template for wall-mounting holes
- Key for WattStation mounting lock
Step 2: Check for any damage to the unit, the cord or the connector. If no damage
is noticed, proceed to step 3. If damage is noticed, call 1-888-GE-RESOLve.
Step 3: Install wall mount bracket to the wall. Use the provided template to locate
wall-mounting holes to ensure hole locations match the bracket. Distance from
floor to bottom of wall mount bracket should be 18" minimum for indoor use and
24" minimum for outdoor use. Distance to the top of the unit should be 48"
maximum for all applications per NEC 625.29. For ADA compliant installation, refer
to ADA accessibility guidelines, section 4.2
© GE All Rights Reserved
Danger of electrical shock or injury. Turn OFF power at the
6