GE GCG001 Quick Start Manual page 7

FAULT — indicates the detection of faults by the module.
OFF
Red, blinking
Red, ON
CONNECT — indicates a connection to a PROFINET controller.
OFF
Red, blinking
Red, ON
PORT 1, PORT 2 LINK — indicates connection status on Ethernet ports.
Green, ON steady
OFF
PORT 1, PORT 2 ACT — indicates activity on PROFINET ports.
Amber, blinking
OFF
6
No faults present.
DCP Device Identification signal received on
PROFINET.
A fault or other PROFINET diagnostic data exists on
the Gateway
One or more connections with GE's Automation &
Controls PROFINET Controllers have been established
to this device.
Device trying to connect to a controller.
Continuous if device has not been assigned a valid
station name.
No PROFINET Controller connection
Ethernet connection established
No Ethernet connection
Communications occurring on port
No communication
PACSystems RX3i Genius Communications Gateway Quick Start Guide GFK-2891C