Advertisement
52 - 73 mm
•
[USB]: When a USB storage device is connected and
9
Use Bluetooth devices
recognized, you can select this source to play audio files that
(Fig. 7)
are stored on it.
6
Listen to radio
With this car audio system, you can listen to audio from a player
or make a call through Bluetooth.
Select a radio region
Pair a device
You can select a radio region that matches your location.
1
Press and hold
to access the system menu.
Note
2
repeatedly until [AREA] is displayed.
Press
•
Philips does not guarantee the compatibility with all
3
Rotate
to select an option.
Bluetooth devices.
•
•
[USA] (United States)
Before pairing a device with this system, read its user
manual for Bluetooth compatibility. Make sure that the
•
[EUR] (Western Europe)
Bluetooth firmware version of the device is V2.1 or later.
•
[RUS] (Russia)
•
Make sure that Bluetooth function is enabled on your
•
[AUS] (Australia)
device, and your device is set as visible to all other
•
[EAS] (Middle East)
Bluetooth devices.
•
•
[ASI] (Asia Pacific)
The operational range between this system and a Bluetooth
•
device is approximately 3 meters (10 feet).
[JAP] (Japan)
•
•
Any obstacle between this system and a Bluetooth device
[LAT] (Latin America)
can reduce the operational range.
•
Keep away from any other electronic device that may cause
Tune to a radio station
interference.
1
Press
repeatedly to switch the source to [RADIO].
On your device, follow the steps below.
2
Press
repeatedly to select a band: [FM1], [FM2], [FM3],
1
Enable it to search for other Bluetooth devices.
[MW1], or [MW2].
2
In the device list, select CMD305A.
3
Press and hold
or
until the frequency digits
3
Enter the default password "0000".
blink.
»
If the pairing is successful, [PAIR OK] is displayed.
4
Press
or
repeatedly to tune to a radio station
•
To disconnect the device, disable the Bluetooth feature
manually.
on it.
The radio station is broadcast.
»
•
To search for a radio station automatically, press
Play audio from a connected device
or
.
If the connected Bluetooth device supports Advanced Audio
Distribution Profile (A2DP), you can listen to tracks that are
Store stations automatically
stored on the device through the system. If the device also
1
supports Audio Video Remote Control Profile (AVRCP) profile,
Press and hold
to access the system menu.
you can control play on the system.
2
repeatedly until [STORE >] is displayed.
Press
1
Connect the Bluetooth device to this system via Bluetooth.
3
Press
to confirm.
2
Press
The strongest stations of the selected band are saved in
»
»
Play starts automatically.
preset channels automatically.
•
If play does not start, press
•
To pause play, press
•
To skip to the previous or next track, press
Note
•
You can store a maximum of six stations in each band.
Note
•
If the connected device does not support the AVRCP
Tune to a preset station
profile, control play on the connected device.
1
Press
repeatedly to select a band.
2
Press a numeric key to select a preset station.
Make a call
7
Play from a USB storage
Note
•
device (Fig. 5)
Keep the Bluetooth connection active between the system
and your mobile.
This system can play .mp3 and .wma files that are copied onto a
Functions
compatible USB storage device.
Call a number
Note
Redial the last
•
called number
Philips does not guarantee compatibility with all USB
storage devices.
•
NTFS (New Technology File System) file system is not
supported.
Pick up an
1
Connect the USB storage device to the
socket.
incoming call
2
Reject an
Press
repeatedly until [USB] is displayed.
incoming call
»
Play starts automatically.
End a call
If play does not start automatically,
Transfer a phone
1
Press
/
to select a folder.
call to mobile
2
Press
/
to select a file.
3
Press
to start play.
10 Use the dock
8
Listen to an external
An application Philips CarStudio is available on Google Play for
device (Fig. 6)
this car audio system. To enjoy full features, download and install
the application to your Android-powered phone.
Compatible with Android™
Before using the dock, check your Android-powered phone and
make sure that it meets the following requirements:
•
With Android operating system V2.2 or later,
•
With a micro USB socket, and
•
With a width between 52 mm and 73 mm.
For other Android-powered devices with a micro USB socket,
you can use the dock to
•
Charge your device through the supplied USB cable.
Install the CarStudio application (Fig. 8)
Note
•
Make sure that the internet connection is active on your
phone.
1
Run the Google Play Store application on your phone.
(Fig. 8 - 1)
2
Tap
to display the search interface. (Fig. 8 - 2)
3
Type in CarStudio and then tap Search. (Fig. 8 - 3)
4
Tap Philips CarStudio in the search result list. (Fig. 8 - 4)
5
Tap Install and then Accept & download to start the
download and installation.
»
After the download and installation is complete, the
CarStudio icon is displayed in the list of applications.
Connect your phone (Fig. 9)
You can connect your phone to the dock directly or though the
supplied USB cable.
Note
•
Make sure that the width of your phone is between 52 mm
and 73 mm.
•
Before docking your phone, make sure that the dock
bracket is in portrait position.
1
Press
to eject the dock bracket. (Fig. 9 - 1)
repeatedly to switch the source to [BT AUDIO].
2
Pull out the dock bracket until you see the yellow lines and
hear a "click". (Fig. 9 - 2)
.
3
again.
Flip the dock bracket upwards. (Fig. 9 - 3)
/
.
4
Press RELEASE to loosen the hooks. (Fig. 9 - 4)
5
Flip out or hide the USB connector. (Fig. 9 - 5)
•
If the USB socket of your phone is on its bottom, flip
out the USB connector.
•
If the USB socket of your phone is not on its bottom,
flip the USB connector inwards to hide it.
6
Switch the cushions to make sure that no buttons on any
side of the phone are to be covered. (Fig. 9 - 6)
7
Connect your phone to the dock with its screen facing you.
(Fig. 9 - 7)
•
Connect directly. To match the USB socket of your
phone, turn the USB connector by 180° as illustrated
if necessary.
•
Connect through the supplied USB cable.
Actions
8
Pinch the hooks to secure your phone. (Fig. 9 - 8)
Dial the number on your mobile and send
9
Adjust the dock bracket. (Fig. 9 - 9)
the call.
1
Use the CarStudio application
Press .
»
[Redial] is displayed.
Note
2
Press
to confirm.
•
To use the hands-free function or play audio through the
»
[CALL---] is displayed.
dock, connect your phone with the car audio system via
Bluetooth first.
Press
to answer the call.
•
To enjoy the latest features, update the application on your
phone when an update message prompts.
until [END] is displayed.
Press and hold
•
After update, the interface and features may be different
from the description in this section. Follow the actual
Press .
operations.
Press and hold
until [TRANSFER] is
displayed.
1
Run the CarStudio application on your phone.
»
The loudspeakers are muted, and the
•
To switch the interface for more features, swipe on
voice comes from your mobile only.
the screen.
2
Tap an icon to access its feature or change settings.
Charge your phone
Once your phone is connected and recognized, the charging starts.
Advertisement
