SETTING UP
1. Lift up the front end and move the unit by rolling it on the wheels.
Notes
•
Do not move the unit while holding the bridle bar.
•
Do not step on the power plug while moving the unit.
•
Slowly lift and move the unit while taking care not to injure your lower back.
2. Lay out the supplied mat and place the unit on the mat.
* Lay out the mat so that the rubber surface faces down.
•
When laying out the mat, a space of 80 cm to
the left and to the right and 60 cm to the front
and to the rear of the mat is required.
(see illustration)
Caution
•
Be sure to place the unit on the mat
before use.
- Using the unit without the mat may
result in scratches on the floor.
Notes
•
When using the unit on carpet, marks may
remain on the carpet even if the unit was
first placed on the mat.
•
If there is concern about vibration or noise
downstairs, lay out a thick mat that is
commercially available.
EU6441EU.indb
7
Wheels
Mat
GB7
2007/04/18
10:06:41