Panasonic HL-BD82S Service Manual page 26

HL-BD82S
7.13. Probe Temperature replace-
ment
1. Disconnect the power supply cord and remove the Oven
from the cabinet.
2. Remove the rear upper covers.
3. To replace the probe, disconnect it and remove the
attachment screws B.
4. Reinstall the Oven into the cabinet.
5. Reconnect the power supply cord after the Oven is
installed.
6. Run the Oven and check all functions.
7.14. Door hinges replacement
1. Remove the door following the (see section 5.10.Oven
Door Removal).
2. Put the door on a flat surface with a soft cloth to prevent
scratching of the aesthetics.
3. Remove the door external glass by the screws A and B.
4. Remove the hinges unscrewing the screws C and D.
5. To replace the hinges, reverse the previous steps.
6. To replace the aesthetic glass be sure that the door is in
the right position keeping the glass centered.
7. Replace the Oven door following (see section 5.10.Oven
Door Removal)
The new hinges must be preload before assemble (see
section 7.11.Hinges preload replacement)
7.15. Door hinges box replacement
1. Disconnect the power supply cord and remove the Oven
from the cabinet.
2. Remove the door following the section 5.10.Oven Door
Removal.
3. Unscrew the screws A to change support.
4. Disassembling the hinges box from lateral panel.
5. To replace the new hinge box, reverse the previous steps.
6. Replace the Oven door following the section 5.10.Oven
Door Removal.
7. Reinstall the Oven into the cabinet.
8. Reconnect the power supply cord after the Oven is
installed.
9. Run the Oven and check all functions.
26