20
en | Installing
4
Installing
Notice!
To build an UL approved system refer the documentation
contained in the folder titled "_UL" on the delivered CD.
4.1
Mounting
The AMC2-4W can be attached on a standard 35 mm (1.377 in.)
mounting rail using a snap-in mechanism. Attach the AMC2-4W
into the upper edge of the mounting rail [1], then push down
the device and snap it onto the rail by pushing it towards the
back [2].
Figure 4.1: Mounting the AMC2 on a mounting rail
2016-11 | AMC2-4W |
Access Modular
Controller
Bosch Sicherheitssysteme